FIRE SHUTTERS/CURTAINS
The Flameshield 120 Commercial Fire Shutter enables the aesthetics of the application to be taken into consideration.
For commercial applications, like receptions and serveries, for example, the clean lines and internal motor provide a stylish solution to fire safety demands.
If a heavy duty fire shutter is required then there is the Flameshield 240 Industrial Fire Shutter. If you are looking for proven quality and built-in reliability, this fire shutter fits the bill every time.
Testing of the fire shutters has been carried out by Warrington Fire in accordance with clause 8 of BS476 part 22: 1987
Ral Colour Chart -- BS4800 Colour Chart
Fire Shutters
Fire Curtains
TECHNICAL SPECIFICATION
Curtain:
Flameshield 120 - 50mm flat or 75mm curved galvanised steel lath
Flameshield 240 - 75mm curved galvanised steel lath.
Bottom Rail:
Galvanised steel 'T' section
Side Guides:
Flameshield 120 - Galvanised steel 50mm leg (up to 4000 mm) 65mm leg (above 4000 mm).
Flameshield 240 - Galvanised steel 65mm leg.
Fixing Supports:
75mm x 50mm mild steel angle (1 coat primer paint)
OPERATIONS:
Manual Self:
Coiling via pre tensioned sprung barrels enabling push up, pull down action or via 240v electric tubular motor or a 3 phase motor.
MODES OF ACTIVATION:
Fusible Link:
A soldered link separates and releases at 68 degrees centigrade.
Manual Solenoid Release:
The shutter lowers under controlled descent after fire alarm activation.
Auto Solenoid Release:
Again linked to the fire alarm but allows for frequent testing and resetting.
Audio Visual Warning:
Allows for a delay of the shutter closing after a signal from the fire alarm.
Finishes:
Standard galvanised steel finish. The roller shutters can be powder coated to a standard RAL or BS4800 number to suit an individual application.
'Excellence in Retractable Security'
